PX403S
PXI Industry Pack Carrier for 2 IPs

The PX403S is a carrier that provides electrical and mechanical interfaces for two (2) ANSI/VITA 4-1995 standard industry packs with each appearing as an independent PXI instrument. PXI interrupts and triggers fully supported. Provides access to over 350 industry packs.

VX407C
Intelligent PXI/cPCI Carrier

An Intelligent VXI Carrier that allows PXI and cPCI modules to be used in VXI systems. The carrier supports two 3U PXI or cPCI modules or one 6U PXI or cPCI module. It has an on board PowerPC processor that can perform command translation, data analysis, and man other data processing or process control functions.

• Digital Multimeters
• Timer/Counters
• Pulse, frequency, function, and arbitrary waveform generators
• Digital oscilloscopes
• High-speed dynamic digital I/O
  ROM emulators
• A/D and D/A converters
• Power Supplies and DC sources
• Switching: switch matrix, scanner/multiplexers, relays and more
• Special purpose avionics instrumentation
• Obsolescence replacement instruments for the Wavetek 172B, 175, 178, 270, 273, 275, 278. Tektronix AFG 5101, AWG 5110, PG 5110. HP8160, HP8165A and more.
• New - GX7600 9-slot, PXI Express Smart chassis series and the GX7940 PXI Express controller to its family of PXI mainframes and controllers. 

> > PXI Instrumentaion Range

> > Pickering Interfaces PXI Switching Range

> > PXI Automotive Switch Simulator

> > PXI Chassis Range

100MS/s PXI Arbitrary Waveform Generator
Model 3155

100MS/s PXI Arbitrary Waveform Generator
Model 3165

• 14 -bit Resolution for High Dynamic Range
   
• Sample Rates up to 100 MS/s and 1 Meg of waveform Memory
   
• Sine, Square, Triangle, Ramp and Arbitary FM Modulation Waveform Capability
   
• Internal Linear and Log Sweep and FM Plus External FSK
   
• Easy-to Use WaveCad 6.0 GUI and C, CVI, C++ and VB Drivers
   
• Nine Standard Waveforms plus Arbitary Waveforms
  

PXI Wide Band Amplifier
Model 5601

PXI Modular Embedded Controller,
Model 1268

1553 cPCI

The IIB-1553-CPCI is an intelligent interface card providing full MIL-STD-1553 test, simulation and bus analysis capability for the CompactPCI bus, with 1553A, 1553B, McAir and STANAG 3838 capability on a single card.

The IIB-1553-CPCI supports concurrent Bus Controller (BC) and up to 31 Remote Terminals (RT) with Bus Monitor (BM). An additional stand-alone Chronological Bus Monitor (CBM) facility is also provided, with comprehensive multi-level triggering capability.

The IIB-3910-CPCI is a single slot intelligent interface card providing complete STANAG 3838 and STANAG 3910 test, simulation and bus analysis capability for the CompactPCI Bus.

Space Shuttle cPCI

The Shuttle Bus cPCI is an intelligent interface card providing all Launch Data Bus, Ground Data Bus, and Multiplex De-Multiplex Multiple Remote Terminal capability to the Shuttle Bus, as required by NASA specification 84K01203 (Hardware Specification, Launch Data Bus (LDB) and Ground Data Bus (GDB) Interface Board). In summary, this card provides all features and functions required to meet the above specification, in a cPCI platform, with Simplex & Half-Duplex modes provided. Specific operational modes provided include for LDB_BCT, LDB_MRT, GDB_BCT, GDB_MRT, BUS_MON, MDM_MRT, Primitive and Calibration modes.